Molton budget-friendly stage masking

Molton is the ideal choice for big results with a small budget. Extra wide, budget-friendly stage masking with single-sided (0003) or double-sided pile (0007, 0030, 0200 & 0350).

Technical data sheet » ShowTex Rental Guidelines » How to Fold » Contact us for a Quote »

Specifications:

Attachment: Grommets & tie lines OR hook and loop fastener (in combination with EasyDrape)
Hem: 10 cm Pipe hem
Backdrops: height: 0.3 – 15 m / width: 3 – 24 m
Masking – Legs: height: 3 – 15m / width: 3 or 6 m
Molton black (0007) is now also available in 3.5 and 4.5 m high.

Handy tips:

Use Molton when you need to:

• Decorate any kind of event
• Mask large areas
• Create a neutral background
• Build a fabric “wall” to separate two spaces
• Cover a tunnel entrance or walkway
• Create a basic stage backdrop

Want a neat and even 100% pleat?
For 3 m width you’ll need 6 m of Molton. Fasten two tie lines together while keeping the inside fabric tight.

Want a 50% pleat?
For 4 m width you’ll need 6 m of Molton. Mark the pipe or truss at 4 meter intervals. Fasten the two corners at the markers. Then fasten the middle of the curtain halfway between the markers. Repeat until the entire curtain is attached.
Make sure you allow enough extra fabric for creating an overlap over a distance of 2 or 3 grommets.

Want to create a sleek panel effect?
Just slide a Fastco weighting pipe through the open hem. Make sure you allow enough extra fabric for creating an overlap over a distance of 2 or 3 grommets.

Combine with rail systems and EasyDrape temporary walls. Do not forget to finish freestanding walls on both sides.

• Velours Puccini
• All
• Velours Delta